DESCRIPTION: “ENVIRO SAFE” is a completely and rapidly biodegradable cleaner and broad-spectrum disinfectant.
“ENVIRO SAFE” contains naturally derived solvent, blended vegetable oil surfactants and phosphate free water conditioner and dispersants. “ENVIRO SAFE” is very concentrated and provides rapid penetration and removal of most soils off a variety of surfaces. “ENVIRO SAFE” is seawater compatible for marine applications and can be used on any washable surface. MAF C31 (New Zealand) & AQIS (Australia) approved.
APPLICATIONS: Removing grease and oil from: Bitumen, Concrete, Extreme cases Carpet cleaning: Spots & through machine Car Washing: Car washing external through pressure spray, General Cleaning: Chrome and steel, Conveyor Belts, Floors daily, Floors stripping polish, Glass cleaner, spray and wipe. Kitchen equipment: Loose items soak, Wipe on wipe off, Baked and burnt pans – soak kitchen stove & hoods Marine: Hulls and decks, Bilges oil and grease Metal degreasing Building/Houses: Roofs/pathways, Showers and baths spray and wipe Upholstery: Spot & general cleaning Curtain Side Cleaning Walls: Ingrained dirt, Light dirt, Fire smoke, Cigarette smoke, Water blasting/steam cleaning INSTRUCTIONS: Dilute accordingly and spray, brush or soak. Allow to dwell for 1-2 minutes then rinse or wipe off. For food surfaces rinse thoroughly with potable water. Test fabrics and carpets for colour fastness. When using strong concentrations on old paint, test effect on paintwork.
“ENVIRO SAFE”, by way of its cationic ingredient, will disinfect effectively at dilutions of up to 1:30 parts water. Due to the lower molecular weight for disinfecting ingredients with other Envirochem disinfectants, these may offer higher disinfecting properties and/or increased dilution levels. The cleaning operation, however, may not be as efficient.
###################### #######################
*************GRE SOLVE (Solvent Degreaser) ************** DESCRIPTION: Gre Solveis formulated combination of wetting agents, penetrating agents, emulsifiers and solvents designed to provide an economical, effective and safe degreasing system, particularly suitable for automotive components. It is not suitable for heavy carbon removal.
Gre Solve has been carefully developed to avoid the problems associated with emulsifying degreasers. It works by dispersing oil and grease particles rather than emulsifying them with the rinse water. This technique enables rapid and complete separation of the oil from the water. The chemical goes into the oil phase, thus leaving the water phase clean from chemical and oil. The oil phase can be reclaimed or burned without any interference from the chemical, and oil/water separators can work to maximum capacity.
APPLICATIONS: Automobile, motorcycle and all mechanical degreasing, preservative wax removal, industrial equipment degreasing, removal of heavy grease and oil, contaminated concrete floors (not suitable for cleaning tarseal or asphalt). A solvent is ultrasonic cleaning machines, cleaning off and dissolving tar or bitumen and typewriter cleaning. For degreasing operations which cannot be followed by a water rinse, i.e. electrical components, Electromate is recommended.
INSTRUCTIONS FOR USE: The product can be used either for spray, brush-on application or in a tank for soak cleaning.
1. Spray or Brush-On: Gre Solve is applied liberally to parts to be cleaned and allowed to stand for about five (5) minutes. The article is then hosed down with a strong jet of water.
2. Tank Application: The article is allowed to soak for at least fifteen (15) minutes (overnight can be an advantage). It isthen removed, drained and hosed off with a jet of water. Avoid adding water to the soak tank from thehose and cover with a rain proof lid if the tank is sited in the open. Some water intake is tolerated but too much will spoil the product’s cleaning characteristics.
3. Preservative Wax Removal: (i) Ensure that the surface to be de-waxed is dry and cool. Do not use in direct sunlight or on hot paintwork cool to below 300 C before application of Gre Solve. (ii) Apply liberally to the wax and dirt surface by spray to avoid scratch marks on the paint. Allow to stand for 5- 10 minutes. (iii) Rinse off using a jet of water. (iv) Dry the vehicle. (v) Clean up any remaining wax by repeating above procedure or using a clean swab soaked in Gre Solve. (vi) Rinse off using a jet of water. (vii) Follow up by using EnviroChem’s ENVIRO SAFE for a premium washed and residue free surface.
4. Concrete Cleaning: (i) Apply to concrete. Allow two (2) to three (3) minutes to soak in. (ii) Scrub with a yard broom or other stiff brush. (iii) Hose down with water.
#################################################
*** ALU PLUS ***(ALUMINIUM ALLOY BRIGHTENER AND CLEANER)
DESCRIPTION: A colourless liquid formulated specifically to clean and brighten aluminium surfaces including truck and trailer bodies, automatic transmission housings, railway coal wagons and shipping containers.
INSTRUCTIONS:
1. If the area to be treated is heavily contaminated by oil or grease it is advisable to pre clean using EnviroChem’s “GRE SOLVE”. 2. Wet surface to be treated with water. 3. Apply a solution of “ALU PLUS” diluted with cold water by non-atomising spray or brush. 4. Work from bottom to top and allow the solution to stand for 1-2 minutes. Do not allow to dry. 5. Agitate the surface with a brush and then pressure water rinse thoroughly.
Description : “TAR REMOVER” is a specially formulated combination of wetting agents and solvents designed to give an economical, effective, safe tar removing, cleaning and degreasing system, particularly suitable to remove heavy deposits of tar & asphalt from heavey machineries, Roading equipments & cones etc..
Directions : “TAR REMOVER” can be used either by spray, brush on or dip method.
Apply “TAR REMOVER” liberally to the area / parts to be cleaned and allow to penetrate for at least 5 minutes then hose off with a strong jet of water.
For light deposits “TAR REMOVER” can also be diluted with equal parts of solvents i.e. Kerosene, diesel etc.
****************** TIMBER PLUS *********************
Description:"Timber Plus" will disolve gum build up on sanders - saw blades - planning knives - belts - chain saws and machinery. Direction: Dilute timber plus with 10 parts of water and spray on sanding belt & equipment. Leave for 2 minutes and hose off with strong jet of water.
******************** MOWER PLUS **************************
Description:"Mower Plus" is extremely good for removing acidic build up from Lawn Mowers, Ground Keeping Machineries & Golf balls etc.. Direction: Dilute "Mower Plus" with 10 parts of water and spray on lawn mower. Leave for 2 to 5 minutes and hose off with strong jet of water. "Mower Plus" also has quality to remove green slime on concrete and buildings. Properties: Flash Point: Non flammable. Appearance: viscous, clear, amber liquid. Specific Gravity: approximately 1.38.
********* ENVIRO SAFE ********* 